NuEnergy Gas Limited an emerging ASX listed gas and ancillary power generation development company which operates three CBM Production Sharing Contracts (PSC) in South and Central Sumatra - Indonesia
NuEnergy Gas Limited mengundang anda untuk bergabung menjadi bagian dari tim kami dengan posisi:
Penerimaan Karyawan NuEnergy Gas Limited 2015
SENIOR DRILLING ENGINEER (Code: SDE)
Job Purpose:
The Senior Drilling Engineer is an integral member of a Technical Support Team and whose principle objective is to provide engineering designs and operational support for ongoing operations of CBM exploration wells. You will report to the head of the technical department.
Job Description:
• Interaction with subsurface team for finalization of well locations;
• well design in Co-ordination with G&G, Production;
• Cement design finalization with cementing services provider;
• Conduct Drilling well on Paper Exercise, implement inputs of other functions;
• Coordinate with Civil for New Pads construction;
• Inspection of pads in co-ordination with IPM contractor;
• QC on final drilling program Preparations of TVD and AFE;
• Ensure operations are as per pre-approved drilling program;
• HSE compliance of drilling operations;
• Attend Project Operations co-ordinations meetings
• Perform cost estimates, work and time analysis.
• Performing operation analysis and suggest process improvement
• Prepare Well Complication reports, root cause analysis
• Jakarta office based job but require traveling to the rig locations for supervision if needs.
Qualification, Certification and Experiences:
• Min 10 years of drilling experience with some experience with completions and work overs
• Coal bed methane experience, especially in coal coring
• Experience in drilling fluids selections and cement design
• Experience with various drilling and data management software
• Experience planning , developing operational procedures of CBM wells
• Strong interpersonal and communication skills
• Bachelors degree in Petroleum Engineering or mechanical disciplines
SENIOR PRODUCTION ENGINEER (Code: SPE)
Job Purpose:
The Senior Production Engineer is an integral member of a Technical Support Team and whose principle objective is to provide CBM production engineering designs and technical support for ongoing production of CBM wells and monitor and evaluate well and reservoir performance to optimize the performance of the assets. You will report to the head of the technical department.
Job Description:
• Generating dewatering plan;
• Analyzing and predict well behavior
• Conducting well and reservoir performance monitoring and data acquisition
• Handling flow assurance issues including production chemistry related matters.
• Handling well rate metering (separator, multiphase flow meters etc.) and oil & gas rate allocation.
• Coming up with proposals to increase production (e.g. work-overs, recompletion etc.)
• Reviewing well stimulation design and well completion design.
• Handling coal-fragment management including production prediction, control, design and monitoring.
• Interaction with subsurface team for finalization of well locations;
• Conducting daily analysis and management reporting of the performance of all producing wells
• Analyzing medium/long term production trend
• Troubleshooting to identify causes of deviations in production performance, with a view to evaluating remediation proposals by the Operator, and developing own proposals
• Identifying longer term production optimization opportunities.
Qualification, certification and experiences:
• Min 10 years of oil and gas development experience with some experience in CBM production;
• Experience in CBM production engineering design
• Experience with various professional applications
• Strong interpersonal and communication skills
• Bachelors degree in Petroleum Engineering or mechanical disciplines
SENIOR CBM RESERVOIR ENGINEER (SCRE)
Job Purpose:
The Senior Reservoir Engineer is an integral member of a Technical Support Team and whose principle objective is to provide technical advice and support in the assessment, design and execution of exploration and development programs for CBM projects. You will report to the head of the technical department.
Job Description:
You will be responsible for using both fundamental reservoir engineering skills, as well as CBM specific expertise in reservoir description, development planning, and production optimization for optimal CBM asset development of the company.
Qualification, Certification and Experiences:
• Minimum 10 years of reservoir engineering experience with minimum 3 rears in coal seam gas environments.
• A total experience of 20 years or more would be highly regarded.
• In-depth understanding of Coal Bed Methane reservoir fundamentals including previous experience with CBM reservoir • simulation models and simulators such as Petrel/Eclipse, or GEM;
• Requiring hands-on approach to technical work.
• A degree in Petroleum Engineering.
PROCUREMENT & CONTRACT MANAGER (Code: PCM)
Job Purpose:
The Procurement Manager will provide overall management of companys tenders and contracts. The position reports directly to the Chief Commercial Officer and the Country General Manager in a matrix organisation.
Job Description:
• Lead and manage a team of contracts and procurement officers.
• Provide direction on companys procurement program and report on the status of progress.
• Lead and manage the tender process: contract strategy, tender process, and contract management.
• Ensure compliance with the assurance and governance processes.
• Ensure delivery of business needs to schedule, cost and quality.
• Keep abreast with the developments in the industry and government regulation and appraise the management of any changes.
Internal Interfaces:
• Management team and user departments
• Key assurance stakeholders – HSE / Legal / Tax / Finance
External Interfaces:
• Regulatory authorities
• Supplier and contractor management
• Joint venturers
Dimensions:
• Accountable for all procurement activities.
• Liaise with multiple stakeholders and to inform the management of the status of tenders and contracts, and to secure approvals from relevant authorities.
Qualification, Certification and Experiences:
• Tertiary education
• More than 10 years of tender and contract management experience in the upstream oil and gas industry.
• Recent experience with an operator in Indonesia.
• Leadership experience.
• Full tender cycle experience.
• SKK Migas certification.
Prerequisite Qualities:
• Unquestionable ethics and integrity when managing tender activities.
• Commercial sense, business acumen, and multi-tasking work ability.
Lowongan Februari 2015 lainnya:Job Purpose:
The Senior Drilling Engineer is an integral member of a Technical Support Team and whose principle objective is to provide engineering designs and operational support for ongoing operations of CBM exploration wells. You will report to the head of the technical department.
Job Description:
• Interaction with subsurface team for finalization of well locations;
• well design in Co-ordination with G&G, Production;
• Cement design finalization with cementing services provider;
• Conduct Drilling well on Paper Exercise, implement inputs of other functions;
• Coordinate with Civil for New Pads construction;
• Inspection of pads in co-ordination with IPM contractor;
• QC on final drilling program Preparations of TVD and AFE;
• Ensure operations are as per pre-approved drilling program;
• HSE compliance of drilling operations;
• Attend Project Operations co-ordinations meetings
• Perform cost estimates, work and time analysis.
• Performing operation analysis and suggest process improvement
• Prepare Well Complication reports, root cause analysis
• Jakarta office based job but require traveling to the rig locations for supervision if needs.
Qualification, Certification and Experiences:
• Min 10 years of drilling experience with some experience with completions and work overs
• Coal bed methane experience, especially in coal coring
• Experience in drilling fluids selections and cement design
• Experience with various drilling and data management software
• Experience planning , developing operational procedures of CBM wells
• Strong interpersonal and communication skills
• Bachelors degree in Petroleum Engineering or mechanical disciplines
SENIOR PRODUCTION ENGINEER (Code: SPE)
Job Purpose:
The Senior Production Engineer is an integral member of a Technical Support Team and whose principle objective is to provide CBM production engineering designs and technical support for ongoing production of CBM wells and monitor and evaluate well and reservoir performance to optimize the performance of the assets. You will report to the head of the technical department.
Job Description:
• Generating dewatering plan;
• Analyzing and predict well behavior
• Conducting well and reservoir performance monitoring and data acquisition
• Handling flow assurance issues including production chemistry related matters.
• Handling well rate metering (separator, multiphase flow meters etc.) and oil & gas rate allocation.
• Coming up with proposals to increase production (e.g. work-overs, recompletion etc.)
• Reviewing well stimulation design and well completion design.
• Handling coal-fragment management including production prediction, control, design and monitoring.
• Interaction with subsurface team for finalization of well locations;
• Conducting daily analysis and management reporting of the performance of all producing wells
• Analyzing medium/long term production trend
• Troubleshooting to identify causes of deviations in production performance, with a view to evaluating remediation proposals by the Operator, and developing own proposals
• Identifying longer term production optimization opportunities.
Qualification, certification and experiences:
• Min 10 years of oil and gas development experience with some experience in CBM production;
• Experience in CBM production engineering design
• Experience with various professional applications
• Strong interpersonal and communication skills
• Bachelors degree in Petroleum Engineering or mechanical disciplines
SENIOR CBM RESERVOIR ENGINEER (SCRE)
Job Purpose:
The Senior Reservoir Engineer is an integral member of a Technical Support Team and whose principle objective is to provide technical advice and support in the assessment, design and execution of exploration and development programs for CBM projects. You will report to the head of the technical department.
Job Description:
You will be responsible for using both fundamental reservoir engineering skills, as well as CBM specific expertise in reservoir description, development planning, and production optimization for optimal CBM asset development of the company.
Qualification, Certification and Experiences:
• Minimum 10 years of reservoir engineering experience with minimum 3 rears in coal seam gas environments.
• A total experience of 20 years or more would be highly regarded.
• In-depth understanding of Coal Bed Methane reservoir fundamentals including previous experience with CBM reservoir • simulation models and simulators such as Petrel/Eclipse, or GEM;
• Requiring hands-on approach to technical work.
• A degree in Petroleum Engineering.
PROCUREMENT & CONTRACT MANAGER (Code: PCM)
Job Purpose:
The Procurement Manager will provide overall management of companys tenders and contracts. The position reports directly to the Chief Commercial Officer and the Country General Manager in a matrix organisation.
Job Description:
• Lead and manage a team of contracts and procurement officers.
• Provide direction on companys procurement program and report on the status of progress.
• Lead and manage the tender process: contract strategy, tender process, and contract management.
• Ensure compliance with the assurance and governance processes.
• Ensure delivery of business needs to schedule, cost and quality.
• Keep abreast with the developments in the industry and government regulation and appraise the management of any changes.
Internal Interfaces:
• Management team and user departments
• Key assurance stakeholders – HSE / Legal / Tax / Finance
External Interfaces:
• Regulatory authorities
• Supplier and contractor management
• Joint venturers
Dimensions:
• Accountable for all procurement activities.
• Liaise with multiple stakeholders and to inform the management of the status of tenders and contracts, and to secure approvals from relevant authorities.
Qualification, Certification and Experiences:
• Tertiary education
• More than 10 years of tender and contract management experience in the upstream oil and gas industry.
• Recent experience with an operator in Indonesia.
• Leadership experience.
• Full tender cycle experience.
• SKK Migas certification.
Prerequisite Qualities:
• Unquestionable ethics and integrity when managing tender activities.
• Commercial sense, business acumen, and multi-tasking work ability.
CONTRACT OFFICER (Code: CO)
Job Purpose:
The Contracts Officer will provide tender and contract management support to companys operations. The position reports directly to the Contracts and Procurement Manager.
Job Description:
• Coordinate and manage the tender process: contract strategy, tender, tender evaluation, bidder engagement and negotiation, award recommendation, contract approval and execution, and contract management.
• Comply with the assurance and governance process and ensure relevant internal stakeholders are involved and functional issues represented in the contracts and contracting process including compliance with the PSC procurement procedure and the • companys Contracts and Procurement Management Standard.
• Ensure delivery of business needs to schedule, cost and quality.
Internal Interfaces:
• Internal user departments
• Key assurance stakeholders – HSE / Legal / Tax / Finance
External Interfaces:
• Supplier and contractor management
• Other consultants who may be working for the company on certain specialist expertise areas.
Dimensions:
• Contract Officer is accountable for procurement of services and materials contracts.
• Contracts Officer has to liaise with multiple stakeholders and to inform the manager of the status of tenders and contracts, and to secure approvals from relevant authorities.
Qualifications And Experience:
• Tertiary education
• More than 5 years of tender and contract management working experience in the upstream oil and gas industry.
• SKK Migas certification.
Prerequisite Qualities
• Unquestionable ethics and integrity when managing tender activities.
• Commercial sense, business acumen, and multi-tasking work ability.
Able to work under pressure.
SECRETARY
Job Purpose:
Enhances effectiveness by providing information management support.
Job Description:
• Produces information by transcribing, formatting, inputting, editing, retrieving, copying, and transmitting text, data, and graphics.
• Organizes work by reading and routing correspondence; collecting information; initiating telecommunications.
• Maintains department schedule by maintaining calendars for department personnel; arranging meetings, conferences, teleconferences, and travel.
• Maintains and protects operations by keeping information confidential.
• Prepares reports by collecting information.
• Maintains office supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies.
• Keeps equipment operational by following instructions and established procedures.
• Secures information by completing database backups.
• Provides historical reference by utilizing filing and retrieval systems.
• Contributes to team effort by accomplishing related results as needed.
• Qualification, Certification and Experiences: Administrative Writing Skills, Reporting Skills, Supply Management, Scheduling, Microsoft Office Skills, Professionalism, Confidentiality, Organization, Travel Logistics, Typing, Verbal • Communication, been working in oil & gas industry is an advantage.
GENERAL REQUIREMENTS FOR ALL CANDIDATES:
• Proficient in Bahasa Indonesia, English both written and oral plus Mandarin is preferable for Secretary Position.
• Excellent computer software skill MS Office (Excel and Word) plus SAP B1 for PCM & CO.
• Able to think laterally, identify, analytical and problem solver.
• A good team work, able to work under pressure, and working effectively (with minimum supervision) in a diverse, multidiscipline team environment.
Job Purpose:
The Contracts Officer will provide tender and contract management support to companys operations. The position reports directly to the Contracts and Procurement Manager.
Job Description:
• Coordinate and manage the tender process: contract strategy, tender, tender evaluation, bidder engagement and negotiation, award recommendation, contract approval and execution, and contract management.
• Comply with the assurance and governance process and ensure relevant internal stakeholders are involved and functional issues represented in the contracts and contracting process including compliance with the PSC procurement procedure and the • companys Contracts and Procurement Management Standard.
• Ensure delivery of business needs to schedule, cost and quality.
Internal Interfaces:
• Internal user departments
• Key assurance stakeholders – HSE / Legal / Tax / Finance
External Interfaces:
• Supplier and contractor management
• Other consultants who may be working for the company on certain specialist expertise areas.
Dimensions:
• Contract Officer is accountable for procurement of services and materials contracts.
• Contracts Officer has to liaise with multiple stakeholders and to inform the manager of the status of tenders and contracts, and to secure approvals from relevant authorities.
Qualifications And Experience:
• Tertiary education
• More than 5 years of tender and contract management working experience in the upstream oil and gas industry.
• SKK Migas certification.
Prerequisite Qualities
• Unquestionable ethics and integrity when managing tender activities.
• Commercial sense, business acumen, and multi-tasking work ability.
Able to work under pressure.
SECRETARY
Job Purpose:
Enhances effectiveness by providing information management support.
Job Description:
• Produces information by transcribing, formatting, inputting, editing, retrieving, copying, and transmitting text, data, and graphics.
• Organizes work by reading and routing correspondence; collecting information; initiating telecommunications.
• Maintains department schedule by maintaining calendars for department personnel; arranging meetings, conferences, teleconferences, and travel.
• Maintains and protects operations by keeping information confidential.
• Prepares reports by collecting information.
• Maintains office supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies.
• Keeps equipment operational by following instructions and established procedures.
• Secures information by completing database backups.
• Provides historical reference by utilizing filing and retrieval systems.
• Contributes to team effort by accomplishing related results as needed.
• Qualification, Certification and Experiences: Administrative Writing Skills, Reporting Skills, Supply Management, Scheduling, Microsoft Office Skills, Professionalism, Confidentiality, Organization, Travel Logistics, Typing, Verbal • Communication, been working in oil & gas industry is an advantage.
GENERAL REQUIREMENTS FOR ALL CANDIDATES:
• Proficient in Bahasa Indonesia, English both written and oral plus Mandarin is preferable for Secretary Position.
• Excellent computer software skill MS Office (Excel and Word) plus SAP B1 for PCM & CO.
• Able to think laterally, identify, analytical and problem solver.
• A good team work, able to work under pressure, and working effectively (with minimum supervision) in a diverse, multidiscipline team environment.
Lowongan Kerja NuEnergy Gas Limited
Submit your applications along with full resume, details of current and expected remuneration with recent photograph to:
Email : recruitment.ngy@gmail.com
CLOSED : 13 Februari 2015